Commercial insulation in Gilroy, CA - roofs and walls that hold the temperature
Warehouse running hot, shop floor cold all winter, or a reroof coming up? We insulate roofs and walls so the building holds its temperature.
Request an estimate
What does commercial insulation involve on a Gilroy building?
Commercial insulation in Gilroy is the material we install in a building's roof and walls to control temperature, sound or both. When you're redoing a roof or upgrading walls, it's also what brings that part of the building up to California's Energy Code.
Most property managers call me because a roof is due, a metal shop bakes all summer, or tenants hear every rainstorm. The first decision is usually whether the roof gets a recover, a new covering laid over the old one, or a full replacement. A recover usually costs less, but it only works on a roof that's still in good shape. Your price moves with the roof size, recover versus replacement, how the walls are framed and anything we find that has to be fixed first. The schedule mostly follows the roof work and the order the trades have to go in. The estimate gives you a written plan for your building that shows each of those choices.
How we handle commercial insulation, starting with the roof
We start with the roof's condition, because that decides whether new insulation goes over the old covering or in with a full replacement, and I won't bury a leak under fresh material. I also ask for your ZIP code, the roof size and how the walls are framed, so the plan fits your building instead of a template. Then we set the order. Repairs that have to happen first come first, then the roof insulation, then the walls. Our installers work to the written plan, and I check in along the way so you know what's coming next.
Some buildings need moisture control as much as they need insulation. If an office or older retail space sits over a crawl space, crawl space vapor barrier work keeps damp ground from feeding moisture into the floor. Where a wall or ceiling needs a layer that stops moisture moving through it, we add vapor barrier installation to the same plan, so it goes in at the right point in the job.
What a reroof in Gilroy means for commercial insulation
This is the rule behind most of these jobs. When a nonresidential roof in California is replaced or recovered, the state's Energy Code sets an insulation level for the part of the roof you're redoing, and the level depends on the climate zone where the building sits. The California Energy Commission lists climate zones by ZIP code, so you can look yours up before we meet. I'd rather check than guess, which is why your ZIP is one of the first things I ask for.
Around Gilroy we see a lot of metal-roofed shops, ag buildings and low-slope commercial roofs, and we see the same mix on jobs in Morgan Hill and Hollister. We're based in Gilroy and work in the cities around it, north into Santa Clara County and south toward Salinas and Watsonville. If your building isn't in a city we list, call and ask.
- Call (669) 205-6284
- Mon–Fri: 6 AM–11 PM, Sat–Sun: 7 AM–11 PM
- Gilroy, CA 95020
What happens after you call about commercial insulation in Gilroy?
Call or send the form
I pick up or call you back, and we set a time to walk the building. It helps to have the ZIP code, roof size and wall framing handy.
I walk the roof and walls
I look at the roof's condition, the walls and anything under the floor, and I note what needs fixing before insulation goes in. You get a written plan that says recover or replacement, what goes where and in what order.
Our installers work in order
The crew follows the plan step by step, so nothing gets covered up before it's ready. I check in during the job so you're not left guessing about what comes next.
We go over the finished job
Before we pack up, I walk the finished roof and walls with you. If something doesn't look right to you, that's the time to say so.
Why Gilroy property managers call Thermal Gilroy Spray Foam Insulation for commercial insulation
The owner writes your plan
I come out to look at the building and write the estimate myself, and I go over the finished job with you once our installers are done. The work is backed by our satisfaction guarantee.
Running jobs in order since 2021
I spent years scheduling crews before I started this business in 2021, and I learned the trade working next to the installers on the jobs I booked. That's why the order of the work gets so much attention on your building.
Roof level checked against your ZIP
Before we size the roof insulation, we check your building's ZIP against the state's climate zone list. That way the plan is written to the level your reroof has to meet.
Licensed and insured on every job
We're licensed and insured. That matters on a commercial roof, where a crew is working up high over your tenants and your property.
Getting the order right matters most here, roof first and nothing hidden under new insulation. Tell us about your building and I'll set up a time to come take a look.
Request an estimateGet a written insulation plan for your commercial building
We reply within 1 business day, and the on-site estimate is free with no pressure to book. Once you send the form, I'll reach out to set a time, then come look at the roof and walls and walk you through a written plan.
- Licensed and insured.
- Phone
- (669) 205-6284
- Location
- Gilroy, CA 95020
- Hours
- Mon–Fri: 6 AM–11 PM, Sat–Sun: 7 AM–11 PM
Questions about commercial insulation in Gilroy
What does commercial insulation cost per square foot near San Jose?
Insulation in the San Jose area usually costs about $1 to $6 per square foot. That's the general market range, not our price. Where your building lands depends on the roof size, recover or replacement, and how the walls are framed, so I'd look at the building before putting a plan in writing.
Can we recover our commercial roof instead of replacing it?
Yes, if the roof is in good condition and doesn't already have a recover, because usually only one is allowed. A recover that adds new insulation above the deck, the roof's structural surface, doesn't have to reach the full Energy Code level, which is part of why it costs less. If your roof already carries a recover, plan on a replacement.
Do small commercial roof repairs have to meet California's insulation rules?
No, small repairs fall outside the state's roof insulation requirements. On a nonresidential building, those requirements kick in when the work covers half the roof or more, or more than 2,000 square feet, whichever is less.
Who is allowed to install commercial insulation in California?
A contractor holding California's C-2 Insulation and Acoustical license, which covers installing any insulating material for temperature or sound control. The state's small-job exemption only covers work under $1,000 that needs no permit and is done by someone with no employees, so anything beyond that calls for a licensed contractor.
How do I insulate metal-framed walls to meet California's Energy Code?
Usually by adding a continuous, unbroken layer of insulation over the framing, because insulation only between metal studs may not be enough. The code judges the whole wall by U-factor, the heat that gets through the entire wall, not by the insulation's rating alone, and steel framing carries heat right past the batts. That's why I ask about your framing at the start, so it shows up in the plan and not as a surprise.
What is the best way to insulate an exposed metal building roof?
In a filled-cavity metal roof, the state's guidance is that the bottom layer should completely fill the space between the purlins, the roof's horizontal beams, with support bands pulled tight so it doesn't sag. If faced batts will hang exposed under the roof with an air space below, California's standards require a fire-retardant facing tested for flame spread and smoke. Both are fair questions to ask any crew before they start.
Related work for commercial buildings
Crawl space vapor barrier
For offices and shops built over a crawl space, a sealed ground cover keeps damp soil from pushing moisture into the floor above.
Vapor barrier installation
When a wall or ceiling needs moisture held back before it reaches the insulation, this is the layer that does it.
Book a look at your building's roof
Have your ZIP code, roof size, roof condition and wall framing ready when you call (669) 205-6284 or email office@insulationgilroy.com, and the first visit covers more ground.
Request an estimateCall (669) 205-6284